{"title":"No Stud TV Wall Mounts","description":"\u003cp\u003eMount-It! no stud TV mounts are engineered to anchor securely into standard drywall without stud contact — using an industrial-grade toggle anchor system rated for TVs up to 100 lbs. Fixed, tilt, and low-profile options available for screens 32\" to 85\".\u003c\/p\u003e\n\u003cp\u003eNo stud finder required. No wall demolition. Installation takes under 45 minutes with a drill and a level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Mount-It! no stud TV mounts include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-installed toggle anchor hardware rated beyond typical drywall anchors\u003c\/li\u003e\n\u003cli\u003eWide anchor spread (16\"+ between points) for even load distribution\u003c\/li\u003e\n\u003cli\u003eCompatible with standard VESA patterns from 75×75mm to 600×400mm\u003c\/li\u003e\n\u003cli\u003eBuilt-in level for precise horizontal alignment\u003c\/li\u003e\n\u003cli\u003eCable management channel included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which mount is right for your TV?\u003c\/strong\u003e Use the buying guide and FAQ below the products, or \u003ca href=\"\/blogs\/articles\/how-to-mount-a-tv-on-the-wall-without-studs\"\u003eread our full no-stud installation guide →\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eWhich No Stud TV Mount Is Right for You?\u003c\/h2\u003e\n\u003cp\u003eNot all no-stud installations are the same. Your TV's weight and how you want it to move determines which mount makes sense.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixed (flat) mounts\u003c\/strong\u003e hold the TV flush against the wall — no tilt, no swivel. Lowest profile, lowest stress on the drywall anchors. Best choice if your TV is directly at seated eye level and you don't need to adjust the viewing angle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTilt mounts\u003c\/strong\u003e allow 5°–15° of downward tilt, which is useful if you're mounting slightly higher than eye level — above a console, for example, or in a bedroom above a dresser. Tilt puts modest additional stress on anchors versus fixed, but remains safe within rated weight limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull-motion (articulating) mounts\u003c\/strong\u003e extend the TV away from the wall on an arm. In a no-stud installation, the arm creates leverage that multiplies the force on your anchors when extended. If you need a full-motion mount and cannot hit a stud, use a mount rated for at least 2× your TV's weight, and favor a shorter arm extension to minimize leverage. For TVs over 65 inches, we recommend hitting at least one stud or using a French cleat for full-motion installations.\u003c\/p\u003e\n\u003ch3\u003eWeight and TV Size Compatibility\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTV screen size\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTypical TV weight\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended mount type\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e32\"–42\"\u003c\/td\u003e\n\u003ctd\u003e15–30 lbs\u003c\/td\u003e\n\u003ctd\u003eFixed, tilt, or full-motion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e43\"–55\"\u003c\/td\u003e\n\u003ctd\u003e30–55 lbs\u003c\/td\u003e\n\u003ctd\u003eFixed or tilt preferred\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e56\"–65\"\u003c\/td\u003e\n\u003ctd\u003e50–85 lbs\u003c\/td\u003e\n\u003ctd\u003eFixed or tilt — full-motion with caution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e66\"–75\"\u003c\/td\u003e\n\u003ctd\u003e70–100 lbs\u003c\/td\u003e\n\u003ctd\u003eFixed only — confirm system weight rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e76\"–85\"\u003c\/td\u003e\n\u003ctd\u003e90–130 lbs\u003c\/td\u003e\n\u003ctd\u003eFrench cleat recommended at this weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWorks in Apartments and Rentals\u003c\/h3\u003e\n\u003cp\u003eNo-stud mounts leave minimal wall damage — four 1\/2\" holes — and remove cleanly. Most landlords accept this as standard. Patch with standard drywall compound before move-out. Do not substitute the included anchor hardware with generic alternatives purchased separately — the system weight rating covers the included hardware as a unit.\u003c\/p\u003e\n\u003ch3\u003eWall Types That Work (and Don't)\u003c\/h3\u003e\n\u003cp\u003eNo stud TV mounts use toggle bolt anchors and require hollow drywall to function correctly. They work in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 1\/2\" drywall\u003c\/li\u003e\n\u003cli\u003e5\/8\" drywall (common in newer construction and fire-rated walls)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThey do \u003cstrong\u003enot\u003c\/strong\u003e work in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlaster walls (pre-1950s homes — plaster cracks under toggle expansion)\u003c\/li\u003e\n\u003cli\u003eTile or stone surfaces\u003c\/li\u003e\n\u003cli\u003eBrick or masonry (requires masonry anchors — see our \u003ca href=\"\/collections\/tv-mounts\"\u003eTV mounts collection\u003c\/a\u003e for options)\u003c\/li\u003e\n\u003cli\u003eHollow metal stud walls (requires specialized cavity anchors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're unsure of your wall type, drill a small test hole with a 1\/4\" bit. If the drill meets hard resistance immediately, it's plaster or masonry — not standard drywall.\u003c\/p\u003e\n\u003ch2\u003eRelated Mounts and Resources\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMore TV mount collections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/tv-mounts\"\u003eAll TV Mounts →\u003c\/a\u003e — full catalog: fixed, tilt, full-motion, ceiling, pull-down\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/full-motion-tv-mounts\"\u003eFull Motion TV Mounts →\u003c\/a\u003e — articulating arm mounts for flexible viewing angles\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/ceiling-tv-mounts\"\u003eCeiling TV Mounts →\u003c\/a\u003e — ideal alternative when no wall studs and no drywall are available\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/65-inch-tv-mounts\"\u003e65-Inch TV Mounts →\u003c\/a\u003e — mounts rated and sized for 65\" screens\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/75-inch-tv-mounts\"\u003e75-Inch TV Mounts →\u003c\/a\u003e — mounts rated and sized for 75\" screens\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/blogs\/articles\/how-to-mount-a-tv-on-the-wall-without-studs\"\u003eHow to Mount a TV Without Studs — Full Guide →\u003c\/a\u003e — three methods, step-by-step installation, weight limit tables\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/blogs\/articles\/ideal-tv-mounting-height\"\u003eHow High Should a TV Be Mounted? →\u003c\/a\u003e — find the right height for your room and seating setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/blogs\/articles\/tv-wall-mount-weight-limit\"\u003eTV Wall Mount Weight Limit Guide →\u003c\/a\u003e — understand ratings before you buy\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"mount-it-no-stud-tv-wall-mount-mi-376","title":"No Stud TV Wall Mount","description":"\u003cp\u003eMount-It! MI-376 fixed TV wall mount fits most 32 inch to 80 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 600x600 mm and a maximum weight capacity of 110 lbs. This fixed mount sits 1.2 inches from the wall for a low profile installation and holds the screen securely in a single position. Constructed from heavy duty metal, the 27.5 inch by 3 inch wall plate supports no stud drywall installation at 16 inch and 24 inch on center spacing for stud anchoring. Compatible installation surfaces include tile over studs, tile over masonry, drywall only, plywood backing wall, solid wood wall, brick veneer, brick, concrete block, concrete, metal studs, and wood studs. Suitable for large TVs in living rooms, bedrooms, home theaters, offices, conference rooms, classrooms, and commercial spaces. Compatible with VESA standard flat panel TVs from major brands including Samsung, LG, Sony, TCL, Vizio, Hisense, and other TVs within the supported size, weight, and VESA range. Includes user manual and mounting hardware.\u003c\/p\u003e","brand":"Mount-It!","offers":[{"title":"Default Title","offer_id":22689537261686,"sku":"MI-376","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3674\/4566\/files\/no-stud-tv-wall-mount-mount-it-mi-376-1166584460.jpg?v=1763598867"},{"product_id":"no-stud-tv-wall-mount-for-tvs-37-to-85","title":"No Stud TV Wall Mount","description":"\u003cp\u003eMount-It! MI-379 fixed TV wall mount fits most 37 inch to 85 inch flat panel TVs with VESA mounting patterns from 200x100 mm to 900x600 mm and a maximum weight capacity of 110 lbs. This fixed mount sits 1.1 inches from the wall for a low profile installation and holds the screen securely in a single position. Constructed from heavy duty metal, the 25.98 inch by 3.07 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing. Compatible installation surfaces include tile over studs, tile over masonry, drywall only, plywood backing wall, solid wood wall, brick veneer, brick, concrete block, concrete, metal studs, and wood studs. Suitable for large TVs in living rooms, bedrooms, home theaters, offices, conference rooms, classrooms, and commercial spaces. Compatible with VESA standard flat panel TVs from major brands including Samsung, LG, Sony, TCL, Vizio, Hisense, and other TVs within the supported size, weight, and VESA range. Includes user manual and mounting hardware.\u003c\/p\u003e","brand":"Mount-It!","offers":[{"title":"Black","offer_id":47045823332507,"sku":"MI-379","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3674\/4566\/files\/MI-379_Main_01.jpg?v=1763664548"},{"product_id":"no-stud-tv-wall-mount-for-tvs-23-65","title":"No Stud TV Wall Mount","description":"\u003cp\u003eMount-It! MI-378 fixed TV wall mount fits most 23 inch to 65 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 400x400 mm and a maximum weight capacity of 77 lbs. This fixed mount sits 1.1 inches from the wall for a low profile installation and holds the screen securely in a single position. Constructed from heavy duty metal, the 17.32 inch by 3.07 inch wall plate supports no stud drywall installation at 16 inch on center spacing for stud anchoring. Compatible installation surfaces include tile over studs, tile over masonry, drywall only, plywood backing wall, solid wood wall, brick veneer, brick, concrete block, concrete, metal studs, and wood studs. Suitable for TVs and monitors in bedrooms, home offices, dorm rooms, small living rooms, kitchens, and retail displays. Compatible with VESA standard flat panel TVs from major brands including Samsung, LG, Sony, TCL, Vizio, Hisense, and other TVs within the supported size, weight, and VESA range. Includes user manual and mounting hardware.\u003c\/p\u003e","brand":"Mount-It!","offers":[{"title":"Black","offer_id":47045817925787,"sku":"MI-378","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3674\/4566\/files\/MI-378_Main_01.jpg?v=1763664595"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3674\/4566\/collections\/MI-379_Lifestyle_03.jpg?v=1775758384","url":"https:\/\/www.mount-it.com\/collections\/no-stud-tv-mounts.oembed","provider":"Mount-It!","version":"1.0","type":"link"}