Verified TV compatibility

SunBriteTV SB-S2 Signature 2 (partial-sun) 43" TV Mount

Matched to your TV's verified VESA pattern and weight, so you order the right mount once.
90 Mount-It! mounts fit this TV, every one backed by a lifetime warranty.

See 90 compatible mounts

How we determine compatibility

We take this TV's verified VESA pattern (200x200 mm) and its weight without the stand (40 lb), cross-checked against snapav.com and audiovideonation.com, and compare them to each Mount-It! mount's published VESA range and weight rating, applying roughly a 15% weight safety margin. We use the no-stand weight because that is the load the mount actually carries; the with-stand figure stops mattering once the TV is mounted.

Choose a mount whose VESA range covers 200x200 mm and whose weight capacity is at least 40 lb, ideally with about 15% headroom.
Wall type matters: wood studs accept any compatible mount; concrete or brick needs anchors rated for masonry; steel studs need a toggle, an adapter, or a wood backing plate.
Before ordering, double-check that the four mounting holes on the back of your SunBriteTV SB-S2 Signature 2 (partial-sun) measure 200x200 mm, since manufacturers occasionally vary the pattern by region or revision.

Compatible mounts for the SunBriteTV SB-S2 Signature 2 (partial-sun) 43"

Placement

Movement

8 recommended mounts for your SunBriteTV SB-S2 Signature 2 (partial-sun) 43"

motorized-ceiling-tv-mount-with-remote-and-app-controller-mi-4224

Holds up to 77 lb

In stock

motorized-fireplace-tv-wall-mount-fits-40-70-inch-tv-screen-mi-386

Holds up to 77 lb

In stock

mount-it-low-profile-slim-tv-wall-mount-fixed-tv-bracket

Holds up to 77 lb

In stock

mount-it-low-profile-tv-wall-mount-tilt-bracket-for-flat-screens

Holds up to 77 lb

In stock

mount-it-camper-tv-wall-mount-with-detachable-bracket-mi-431

Holds up to 77 lb

In stock

mount-it-fixed-tv-wall-mount-mi-13050xl

Holds up to 77 lb

In stock

mount-it-truss-tv-mount-with-quick-release-mi-374

Holds up to 88 lb

In stock

mount-it-swivel-rv-tv-wall-mount-with-detachable-bracket-mi-430

Holds up to 77 lb

In stock

Browse the full TV mount collection

Browse more TV mounting guides

Comparing options for another TV? Jump straight to its verified mount guide, with the same fit checks and recommended mounts.

See all 44 brands →

More SunBriteTV TVs

More SunBriteTV TVs14

SB-FS 49"SB-FS 55"SB-FS 65"SB-FS 75"SB-P2 32"SB-P2 43"SB-P2 49"SB-P2 55"SB-P2 65"SB-S2 55"SB-S2 65"SB-V3 55"See all 14 SunBriteTV TVs →

Jump to another brand

Frequently asked questions

What VESA pattern does the SunBriteTV SB-S2 Signature 2 (partial-sun) 43" use?

The SB-S2 Signature 2 (partial-sun) 43" uses a VESA 200x200 mm mounting pattern (the distance between the four threaded holes on the back of the TV).

How much does the SB-S2 Signature 2 (partial-sun) 43" weigh?

It weighs 40 lb without the stand, which is the figure that matters when choosing a mount.

Does it need a special or proprietary mount?

No. Any standard mount that supports VESA 200x200 and at least 40 lb will fit.

Sources

Compiled and verified by Mount-It! TV specifications are sourced from manufacturer spec sheets and independent references; mount specifications come from Mount-It!'s own product data. Many Mount-It! mounts are independently tested to UL or ANSI load-safety standards, and every mount is backed by a lifetime warranty.

Always confirm your TV's exact VESA pattern and weight, and re-check current pricing and availability, before buying. Questions? Contact Mount-It! support. Browse all TVs or shop all TV mounts.