Mount-It! Full Motion TV Wall Mount with Extra Long Extension for 40" to 80" TVs | MI-372

It is impossible to center this mount within a defined wall area. Honestly could not believe it was true but it is -- I don;t know who can use this unless you don;t care where the tv sits on the wall, give-or-take ***** or the other. Now its too late to return it so its a useless piece of junk and I need to buy a better-designed mount.

Bought this to mount above a fireplace in new construction and needed the long extension for access. The mount itself is solid and sturdy enough to hold a 75" TV easily. The one drawback is that the mount will NOT center on the fireplace when pushed all the way back. There is no way to slide it far enough in either direction to allow centering. This is probably not an issue if you need the mount extended or in a corner, etc. It says NOTHING about this on the site or the product description on the website or in the manual. A very critical miss on Mount-It's part! Since we bought the mount 5 months ago so we could build a plate for the mount in the stone, there is no option for a return according to customer service. Now spending another and additional $174 (less the generous extra 5% discount code) to purchase a mount with the same size back plate. Need to cover all of the details in the description.

This product isn't all that well designed- the openings for the outlet are puzzling, as they are 3-1/2" square, yet a 2-plug outlet is 5-1/2" high- my fault for not verifying this ahead of time! They also do not ship with enough variety of screw lengths. The only thing that saved me from a trip to the hardware store was having saved leftover hardware from another install. The directions are also rather scant.

Could be a perfect mount that extend far enough to turn 75” TV 90 degrees except for: 1. Mount and therefore the TV is not centered on the mount. Requires installing the mount off-centered to the studs that creates the next issue: 2. There are many bolt holes for the top and bottom of the mount but only 3 below the top. That’s creates an issue where you must install the mount off-center to get the TV centered in and desired position where you are not able to used the bolt since there is no corresponding hole for it. The plat should extend to the same extend as top and bottom bolt holes. 3. There are only 2 bolts to hold the tv from rotating horizontally. Regardless how many time adjusted to level position the tv will slide off center when moved! Need a better way to lock the tv to the mount so the horizontal/vertical adjustment stay put! The bolts are too small and there is a fear of over torquing to the point where the bolt will break or threads strip. 4. Also need better instructions and measurements of the actual mount positions such the the final TV position can be achieved without lots of manual measurements hoping the math works out. 5. Should include a permanent level on the mount!! 6. Shipping box and method must be improved. The item is relatively heavy and the box must have been dropped multiple times and the current styrofoam packing is not sufficient in protecting the mount. Received with arm protruding through the box with multiple holes in the cardboard…