Mount-It! Triple TV Display Ceiling Mount for 32" to 65" TVs | MI-515
Tilting TV Mount
Low Profile · Adjustable Viewing Angle
A low-profile tilting TV wall mount for 32 to 65-inch flat screen TVs, sits flush to the wall and lets you angle the screen, rated (up to 198 lb with VESA 200×200 to 600×400 mm).
Tilt −15.0° to eliminate glare and get the right viewing angle from your seat.
Will this fit my TV
Status unknown
Enter your TV weight and VESA pattern to confirm fit
Will this fit my TV
Status unknownEnter your TV weight and select your TV VESA pattern to confirm fit.
Use the TV weight without the stand when possible.
If your pattern is not listed, choose Custom VESA.
Enter the VESA spacing in millimeters.
Triple TV Display Ceiling Mount - Black is backordered and will ship as soon as it is back in stock.
Triple TV Display Ceiling Mount
Features
Fits 32 to 65 inch flat screen TVs
Weight rated up to 198 lb
Adjustable tilt down to −15.0° - reduce glare from above
VESA 200×200 to 600×400 mm - fits most flat panel TV brands
Overview
The Triple TV Display Ceiling Mount is a low-profile tilting TV wall mount for 32 to 65-inch televisions that sits close to the wall for a clean, minimal installation while giving you the ability to angle the screen and eliminate glare. Rated for TVs up to 198 lb.
Adjustable tilt −15.0° to correct the screen angle and get a comfortable viewing position from your couch, bed, or chair.
Compatible with VESA mounting patterns from 200×200 to 600×400 mm.
Specifications
- Product type: TV mount
- Mount type: Tilting
- Screen size range: 32 to 65 in
- Weight capacity: 198 lb
- VESA range: 200×200 to 600×400 mm
- Tilt: −15°
- Corner compatible: No
- Stud installation type: single-stud
- Supported surfaces: Tile over studs (tile on backer board over studs), Tile over masonry (tile on concrete or block), Plywood backing wall, Solid wood wall (planks, beams, timber), Concrete block (CMU/cinder block), Concrete (poured concrete), Metal studs (drywall over metal studs), Wood studs (drywall over studs), Brick veneer, Brick (solid brick)
Installation Resources
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
- Brick veneer
- Brick (solid brick)
Stud setup: Single stud.
Corner installs: Not recommended.
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
