Skip to content
Mount-It! Full Motion TV Wall Mount for 32" to 70" TVs | MI-345
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 32 to 70-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 100 lb with VESA 100×100 to 600×400 mm.
Swivels 180.0° to aim the screen at different seating positions.
Full Motion TV Wall Mount
Features
Fits 32 to 70 inch flat screen TVs
Weight rated up to 100 lb
Swivels 90.0° left and right — aim the screen at any seat
Extends 2.0–24.0 in from the wall for flexible positioning
VESA 100×100 to 600×400 mm - fits most flat panel TV brands
Supports corner wall installations
Overview
The Full Motion TV Wall Mount is a full motion (articulating) TV wall mount compatible with 32 to 70-inch televisions and rated to hold up to 100 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivels up to 180° and extends 2.0 to 24.0 in from the wall.
Compatible with VESA mounting patterns from 100×100 to 600×400 mm. Also supports corner wall installations for rooms where flat wall space is limited.
A practical choice for large living rooms, corner installs, or any setup where the screen needs to pull far from the wall to reach the optimal viewing angle.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 16.01 lb
- Wall plate dimensions: 19.0×8.75 in
Holds screens
- Screen size range: 32 to 70 in
- VESA range: 100×100 to 600×400 mm
- Weight capacity: 100 lb
Movement
- Swivel: up to 180°
- Extension depth: 2.0 to 24.0 in
- Corner compatible: Yes
Installation
The Full Motion TV Wall Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 30 minutes.
Estimated install time: 30 minutes
Stud installation type: Dual stud
Stud spacing supported: 16 inch stud spacing
Corner installations: Supported
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
