Skip to content
Mount-It! Flip-Down Ceiling TV Mount for 24" to 55" TVs | MI-4225
Tilt and Swivel TV Mount
Tilt & Swivel · Wide Viewing Angle
An articulating full motion TV wall mount for 23 to 55-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 44 lb with VESA 75×75 to 400×400 mm.
Swivels 90.0° and tilts −90.0° to aim the screen at any seat and reduce glare.
Flip-Down Ceiling TV Mount
Features
Fits 23 to 55 inch flat screen TVs
Weight rated up to 44 lb
Swivels 45.0° left and right — aim the screen at any seat
Adjustable tilt down to −90.0° - reduce glare from above
VESA 75×75 to 400×400 mm - fits most flat panel TV brands
Overview
The Flip-Down Ceiling TV Mount is a full motion (articulating) TV wall mount compatible with 23 to 55-inch televisions and rated to hold up to 44 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 45° left or right and tilt −90° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 75×75 to 400×400 mm.
A practical choice for large living rooms or any setup where the optimal viewing position isn't directly in front of the wall.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 5.5 lb
- Wall plate dimensions: 4.13×6.5 in
Holds screens
- Screen size range: 23 to 55 in
- VESA range: 75×75 to 400×400 mm
- Weight capacity: 44 lb
Movement
- Swivel: up to 90°
- Tilt:−90°
Installation
The Flip-Down Ceiling TV Mount is designed for quick and frustration free installation.
Installation is typically completed in about 45 minutes.
Estimated install time: 45 minutes
Stud installation type: Single stud
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Stud finder
- Power drill
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
