Skip to content
Mount-It! Advanced Tilt Premium TV Wall Mount for 40" to 80" TVs | MI-382
Tilting TV Mount
Low Profile · Adjustable Viewing Angle
A low-profile tilting TV wall mount for 40 to 80-inch flat screen TVs, sits flush to the wall and lets you angle the screen, rated (up to 154 lb with VESA 200×200 to 600×400 mm).
Swivels 10.0°, tilts +5.0°/−12.0°, and extends 3.1–5.3 inches. Aim the screen at any seat and reach the right depth.
Advanced Tilt Premium TV Wall Mount
Features
Fits 40 to 80 inch flat screen TVs
Weight rated up to 154 lb
Swivels 5.0° left and right — aim the screen at any seat
Adjustable tilt +5.0° up / −12.0° down - reduce glare, improve your view
Extends 3.1–5.3 in from the wall for flexible positioning
VESA 200×200 to 600×400 mm - fits most flat panel TV brands
Overview
The Advanced Tilt Premium TV Wall Mount is a low-profile tilting TV wall mount for 40 to 80-inch televisions that sits close to the wall for a clean, minimal installation while giving you the ability to angle the screen and eliminate glare. Rated for TVs up to 154 lb.
Swivels 5° left and right, tilt +5°/−12°, and extends 3.1 to 5.3 in from the wall. The long extension arm pulls the screen far enough from the wall to swing past furniture, fireplace surrounds, or room corners without obstruction.
Compatible with VESA mounting patterns from 200×200 to 600×400 mm.
A practical choice for above-eye-level installs where glare is the primary problem to solve.
Specifications
- Product type: TV mount
- Mount type:Tilting
- Product weight: 11.0 lb
- Wall plate dimensions: 25.7×8.2 in
Holds screens
- Screen size range: 40 to 80 in
- VESA range: 200×200 to 600×400 mm
- Weight capacity: 154 lb
Movement
- Swivel: up to 10°
- Tilt:+5°and−12°
- Extension depth: 3.1 to 5.3 in
Installation
The Advanced Tilt Premium TV Wall Mount is designed for quick and frustration free installation.
Installation is typically completed in about 45 minutes.
Estimated install time: 45 minutes
Stud installation type: Dual stud
Stud spacing supported: 16, 24 inch stud spacing
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
