In-Wall TV Cable Management Kits

It's a kit that hides your TV's power cord and AV cables inside the wall. A recessed plate behind the TV holds the outlets and a brush opening for HDMI and Ethernet cables. A second plate near the floor connects to an outlet. A pre-wired power cord runs between the two inside the wall, so no wires show below a wall-mounted TV.

Usually not. Mount-It! in-wall power kits plug into a standard outlet, so there is no hardwiring. You cut two openings in the drywall with the included template and saw, feed the pre-wired cord through the wall and plug in. If your wall has fire blocking or you are unsure about local code, ask an electrician.

Not with your TV's own cord or an extension cord. The National Electrical Code (NEC 400.12) does not allow flexible cords inside walls. An in-wall power kit solves this by running power between two recessed boxes through a pre-wired connection made for behind-the-wall routing. Mount-It! in-wall power kits are ETL certified to industry safety standards.

Yes. Each kit has brush pass-throughs for low-voltage cables such as HDMI, Ethernet, optical audio and coax. They run inside the wall next to the power and come out at the lower plate, near your media console.

Two or three, depending on the kit. The In-Wall TV Cable Concealer with Recessed Power and the In-Wall Cable Management Kit with Power Input Module have three AC outlets. The USB kits have two AC outlets plus USB-A 3.0 and USB-C ports for a streaming stick or charging.

Mount-It! in-wall power kits include a cutting template, a drywall saw and the mounting hardware. A stud finder and a level help you place the openings between studs and line them up with your TV mount.

In an In-Wall Media Box. It holds devices like Apple TV, Roku, Fire TV, a Samsung One Connect box or network gear inside the wall, and its Wi-Fi-transparent cover lets wireless signals through. It installs in drywall between studs, or in concrete in new builds.

Use an on-wall cable concealer instead. The Mount-It! On-Wall TV Cable Concealer Kit is a paintable raceway that mounts on the wall surface with the included anchors and screws, a good fit for brick or concrete walls.