Skip to content
The Beast Full Motion Weatherproof TV Wall Mount for 60" to 110" TVs
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 60 to 110-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 275 lb with VESA 100×100 to 800×600 mm.
Swivels 110.0°, tilts +5.0°/−10.0°, and extends 4.3–38.6 inches. Aim the screen at any seat and reach the right depth.
The Beast Full Motion Weatherproof TV Wall Mount
Features
Fits 60 to 110 inch flat screen TVs
Weight rated up to 275 lb
Swivels 55.0° left and right — aim the screen at any seat
Adjustable tilt +5.0° up / −10.0° down - reduce glare, improve your view
Extends 4.3–38.6 in from the wall for flexible positioning
VESA 100×100 to 800×600 mm - fits most flat panel TV brands
Overview
The The Beast Full Motion Weatherproof TV Wall Mount is a full motion (articulating) TV wall mount compatible with 60 to 110-inch televisions and rated to hold up to 275 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivels 55° left and right, tilt +5°/−10°, and extends 4.3 to 38.6 in from the wall. The long extension arm pulls the screen far enough from the wall to swing past furniture, fireplace surrounds, or room corners without obstruction.
Compatible with VESA mounting patterns from 100×100 to 800×600 mm.
A practical choice for large living rooms or any setup where the screen needs to pull far from the wall to reach the optimal viewing angle.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 43.8 lb
- Wall plate dimensions: 27.2×11.5 in
Holds screens
- Screen size range: 60 to 110 in
- VESA range: 100×100 to 800×600 mm
- Weight capacity: 275 lb
Movement
- Swivel: up to 110°
- Tilt:+5°and−10°
- Extension depth: 4.3 to 38.6 in
Installation
The The Beast Full Motion Weatherproof TV Wall Mount is designed for quick and frustration free installation.
Installation is typically completed in about 60 minutes.
Estimated install time: 60 minutes
Stud installation type: Dual stud
Stud spacing supported: 16, 24 inch stud spacing
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
