Mount-It! Heavy-Duty Tilt TV Wall Mount with Low Profile for 37" to 80" TVs | MI-318B
Tilting TV Mount
Low Profile · Adjustable Viewing Angle
A low-profile tilting TV wall mount for 37 to 80-inch flat screen TVs, sits flush to the wall and lets you angle the screen, rated (up to 175 lb with VESA 100×100 to 600×400 mm).
Tilt −8.0° to eliminate glare and get the right viewing angle from your seat.
Features
Fits 37 to 80 inch flat screen TVs
Weight rated up to 175 lb
Adjustable tilt down to −8.0° - reduce glare from above
Low profile - mounts just 1.5 in from the wall
VESA 100×100 to 600×400 mm - fits most flat panel TV brands
Overview
The Heavy-Duty Tilt TV Wall Mount with Low Profile is a low-profile tilting TV wall mount for 37 to 80-inch televisions that sits close to the wall for a clean, minimal installation while giving you the ability to angle the screen and eliminate glare. Rated for TVs up to 175 lb.
Adjustable tilt −8° to reduce reflections and find the right viewing angle from your seat. Profile depth 1.5 in — sits close to the wall for a neat, minimal installation.
Compatible with VESA mounting patterns from 100×100 to 600×400 mm.
A practical choice for above-eye-level installs where glare is the primary problem to solve.
Specifications
- Product type: TV mount
- Mount type:Tilting
- Product weight: 6.4 lb
- Wall plate dimensions: 25.7×8.3 in
Holds screens
- Screen size range: 37 to 80 in
- VESA range: 100×100 to 600×400 mm
- Weight capacity: 175 lb
Movement
- Tilt:−8°
- Profile depth: 1.5 in
Installation
The Heavy-Duty Tilt TV Wall Mount with Low Profile is designed for quick and frustration free installation.
Easy installation is typically done in about 30 minutes.
Estimated install time: 30 minutes
Stud installation type: Dual stud
Stud spacing supported: 16, 24 inch stud spacing
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
Skip to content








