Verified TV compatibility

Jensen JTV-DC RV 12V DC LED TV 24" TV Mount

Matched to your TV's verified VESA pattern and weight, so you order the right mount once.
36 Mount-It! mounts fit this TV, every one backed by a lifetime warranty.

See 36 compatible mounts

How we determine compatibility

We take this TV's verified VESA pattern (100x100 mm) and its weight without the stand (8.7 lb), cross-checked against jensen-electronics.com and hebronrvparts.com, and compare them to each Mount-It! mount's published VESA range and weight rating, applying roughly a 15% weight safety margin. We use the no-stand weight because that is the load the mount actually carries; the with-stand figure stops mattering once the TV is mounted.

Choose a mount whose VESA range covers 100x100 mm and whose weight capacity is at least 8.7 lb, ideally with about 15% headroom.
Wall type matters: wood studs accept any compatible mount; concrete or brick needs anchors rated for masonry; steel studs need a toggle, an adapter, or a wood backing plate.
Before ordering, double-check that the four mounting holes on the back of your Jensen JTV-DC RV 12V DC LED TV measure 100x100 mm, since manufacturers occasionally vary the pattern by region or revision.

Compatible mounts for the Jensen JTV-DC RV 12V DC LED TV 24"

Placement

Movement

5 recommended mounts for your Jensen JTV-DC RV 12V DC LED TV 24"

mount-it-kitchen-under-cabinet-folding-tv-mount-mi-lcdcm

Holds up to 18 lb

In stock

mount-it-low-profile-tilt-tv-wall-mount-mi-6524

Holds up to 30 lb

In stock

anti-rust-rv-tv-mount

Holds up to 30 lb

In stock

full-motion-vesa-pole-mount-mi-391

Holds up to 18 lb

In stock

vesa-pole-mount-mi-390

Holds up to 18 lb

In stock

Browse the full TV mount collection

Browse more TV mounting guides

Comparing options for another TV? Jump straight to its verified mount guide, with the same fit checks and recommended mounts.

See all 44 brands →

More Jensen TVs

More Jensen TVs2

JTV-DC 19"JTV-DC 28"

Jump to another brand

Frequently asked questions

What VESA pattern does the Jensen JTV-DC RV 12V DC LED TV 24" use?

The JTV-DC RV 12V DC LED TV 24" uses a VESA 100x100 mm mounting pattern (the distance between the four threaded holes on the back of the TV).

How much does the JTV-DC RV 12V DC LED TV 24" weigh?

It weighs 8.7 lb without the stand, which is the figure that matters when choosing a mount.

Does it need a special or proprietary mount?

No. Any standard mount that supports VESA 100x100 and at least 8.7 lb will fit.

Sources

Compiled and verified by Mount-It! TV specifications are sourced from manufacturer spec sheets and independent references; mount specifications come from Mount-It!'s own product data. Many Mount-It! mounts are independently tested to UL or ANSI load-safety standards, and every mount is backed by a lifetime warranty.

Always confirm your TV's exact VESA pattern and weight, and re-check current pricing and availability, before buying. Questions? Contact Mount-It! support. Browse all TVs or shop all TV mounts.