Verified TV compatibility

Samsung LS03FA The Frame 50" TV Mount

Matched to your TV's verified VESA pattern and weight, so you order the right mount once.

How we determine compatibility

We take this TV's verified VESA pattern (200x200 mm) and its weight without the stand (26 lb), cross-checked against hillresi.com and tvreviews.net, and compare them to each Mount-It! mount's published VESA range and weight rating, applying roughly a 15% weight safety margin. We use the no-stand weight because that is the load the mount actually carries; the with-stand figure stops mattering once the TV is mounted.

Choose a mount whose VESA range covers 200x200 mm and whose weight capacity is at least 26 lb, ideally with about 15% headroom.
Wall type matters: wood studs accept any compatible mount; concrete or brick needs anchors rated for masonry; steel studs need a toggle, an adapter, or a wood backing plate.
Before ordering, double-check that the four mounting holes on the back of your Samsung LS03FA The Frame measure 200x200 mm, since manufacturers occasionally vary the pattern by region or revision.

Mounts for the Samsung LS03FA The Frame 50"

This TV needs a proprietary mount. The Samsung LS03FA The Frame requires Samsung No-Gap Wall Mount (Frame); a standard VESA mount will not fit. The options below are shown for reference only.

No standard mount matches this TV. See the note above.

Browse more TV mounting guides

Comparing options for another TV? Jump straight to its verified mount guide, with the same fit checks and recommended mounts.

See all 44 brands →

More Samsung TVs

More Samsung TVs267

AU7000 43"AU7000 50"AU7000 55"AU7000 65"AU7000 70"AU7000 75"AU8000 43"AU8000 50"AU8000 55"AU8000 65"AU8000 75"AU8000 85"See all 267 Samsung TVs →

Jump to another brand

Frequently asked questions

What VESA pattern does the Samsung LS03FA The Frame 50" use?

The LS03FA The Frame 50" uses a VESA 200x200 mm mounting pattern (the distance between the four threaded holes on the back of the TV).

How much does the LS03FA The Frame 50" weigh?

It weighs 26 lb without the stand, which is the figure that matters when choosing a mount.

Does the LS03FA The Frame 50" need a proprietary mount?

Yes. It requires Samsung No-Gap Wall Mount (Frame); a standard VESA mount will not fit.

Sources

Compiled and verified by Mount-It! TV specifications are sourced from manufacturer spec sheets and independent references; mount specifications come from Mount-It!'s own product data. Many Mount-It! mounts are independently tested to UL or ANSI load-safety standards, and every mount is backed by a lifetime warranty.

Always confirm your TV's exact VESA pattern and weight, and re-check current pricing and availability, before buying. Questions? Contact Mount-It! support. Browse all TVs or shop all TV mounts.