Mount-It! Anti-Theft Full Motion TV Wall Mount for 23" to 55" TVs | MI-4152
Tilt and Swivel TV Mount
Tilt & Swivel · Wide Viewing Angle
An articulating full motion TV wall mount for 23 to 55-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 44 lb with VESA 75×75 to 400×400 mm.
Swivels 85.0° and tilts +15.0°/−15.0° to aim the screen at any seat and reduce glare.
Will this fit my TV
Add your TV Details
Enter your TV weight and VESA pattern to confirm fit
Will this fit my TV
Add your TV DetailsEnter your TV weight and select your TV VESA pattern to confirm fit.
Use the TV weight without the stand when possible.
If your pattern is not listed, choose Custom VESA.
Enter the VESA spacing in millimeters.
Features
Fits 23 to 55 inch flat screen TVs
Weight rated up to 44 lb
Swivels 42.5° left and right — aim the screen at any seat
Adjustable tilt +15.0° up / −15.0° down - reduce glare, improve your view
Low profile - mounts just 3.7 in from the wall
VESA 75×75 to 400×400 mm - fits most flat panel TV brands
Overview
The Anti-Theft Full Motion TV Wall Mount is a full motion (articulating) TV wall mount compatible with 23 to 55-inch televisions and rated to hold up to 44 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 43° left or right and tilt +15°/−15° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 75×75 to 400×400 mm.
A practical choice for large living rooms or any setup where the optimal viewing position isn't directly in front of the wall.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 4.8 lb
Holds screens
- Screen size range: 23 to 55 in
- VESA range: 75×75 to 400×400 mm
- Weight capacity: 44 lb
Movement
- Swivel: up to 85°
- Tilt:+15°and−15°
- Profile depth: 3.7 in
Installation
The Anti-Theft Full Motion TV Wall Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 15 minutes.
Estimated install time: 15 minutes
Stud installation type: Single stud
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
Skip to content








