Skip to content
Compact Full Motion TV Wall Mount for 17" to 50" TVs
Tilt and Swivel TV Mount
Tilt & Swivel · Wide Viewing Angle
An articulating full motion TV wall mount for 17 to 50-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 44 lb with VESA 75×75 to 200×200 mm.
Swivels 60.0° and tilts −12.0° to aim the screen at any seat and reduce glare.
Features
Fits 17 to 50 inch flat screen TVs
Weight rated up to 44 lb
Swivels 30.0° left and right — aim the screen at any seat
Adjustable tilt down to −12.0° - reduce glare from above
Low profile - mounts just 2.4 in from the wall
VESA 75×75 to 200×200 mm - fits most flat panel TV brands
Overview
The Compact Full Motion TV Wall Mount is a full motion (articulating) TV wall mount compatible with 17 to 50-inch televisions and rated to hold up to 44 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 30° left or right and tilt −12° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 75×75 to 200×200 mm.
A practical choice for bedrooms and smaller spaces where seating spans multiple directions and a fixed screen position won't cover everyone.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 1.65 lb
- Wall plate dimensions: 3.0×5.5 in
Holds screens
- Screen size range: 17 to 50 in
- VESA range: 75×75 to 200×200 mm
- Weight capacity: 44 lb
Movement
- Swivel: up to 60°
- Tilt:−12°
- Profile depth: 2.4 in
Installation
The Compact Full Motion TV Wall Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 30 minutes.
Estimated install time: 30 minutes
Stud installation type: Single stud
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
