Sharp FV1 AQUOS XLED 65" TV Mount

We take this TV's verified VESA pattern (400x400 mm) and its weight without the stand (68.3 lb), cross-checked against Value Electronics and walts.com, and compare them to each Mount-It! mount's published VESA range and weight rating, applying roughly a 15% weight safety margin. We use the no-stand weight because that is the load the mount actually carries; the with-stand figure stops mattering once the TV is mounted.

• Choose a mount whose VESA range covers 400x400 mm and whose weight capacity is at least 68.3 lb, ideally with about 15% headroom.
• Wall type matters: wood studs accept any compatible mount; concrete or brick needs anchors rated for masonry; steel studs need a toggle, an adapter, or a wood backing plate.
• Before ordering, double-check that the four mounting holes on the back of your Sharp FV1 AQUOS XLED measure 400x400 mm, since manufacturers occasionally vary the pattern by region or revision.